Important note: Always test on the original material before use – on a hidden spot and under your actual processing conditions.
FIXON® Textile Marker Marking Ink (P’100 marking bottle, 100 ml) is a fabric marking ink for permanent marking of textiles.
Features at a glance
- Refillable P’100 marking bottle with 100 ml
- Dust-dry after approx. 1 minute
- Smudge-proof and water-resistant
- In eight colours: white, yellow, orange, red, green, lime, blue, black
Applications
- Marking pieces for textile finishing
- Marking workwear
- Signing textiles in production
Technical data
-
Item number: 34-003
-
Product type: fabric marking ink
-
Contents: 100 ml (P’100 marking bottle, refillable)
-
Colours: white, yellow, orange, red, green, lime, blue and black
-
Application: hold the bottle upright and press onto the surface; even pressure for a uniform line
-
Scope of delivery: P’100 marking bottle with 100 ml ink, without writing tip
-
Drying: dust-dry after approx. 1 minute
-
Properties: permanent marking, smudge-proof and water-resistant
-
Resistance (manufacturer data): organic acids, caustic soda, sulphuric acid, soap and soda washing, temperatures up to approx. 220 °C, peroxide-chlorine bleaching, heat setting, chest ironer, HT dyeing
-
Shelf life: 2 years in the closed original container at room temperature
-
Safety: highly flammable, harmful – keep away from sources of ignition, keep out of the reach of children; observe the label and the safety data sheet
-
Disposal: only dispose of completely emptied or dried-out containers with household waste
-
Safety data sheet: available on request
Frequently asked questions
Can the marking be removed again?
No, you should not assume so. FIXON® Textile Marker is designed for permanent markings. Only apply the marking where it will not be a problem later, and test on the original material first.
Will the marking withstand my finishing process?
According to the manufacturer, the marking ink resists typical stresses of textile finishing (see technical data). Concentrations, temperatures and exposure times are not stated. So check in your own test under your actual process conditions before marking whole batches.
How is the P’100 marking bottle used?
Hold the bottle upright and press it onto the surface to be marked. Apply even pressure to the bottle for a uniform line. Clean the tip after use. The P’100 marking bottle is supplied without a writing tip; writing tips are available separately. The bottle can be refilled with FIXON® Textile Marker refill ink (1000 ml).
Matching products
| Item information |
Value |
| Content: |
100,00 ml
|
Product safety information
Manufacturer information:
Schlemming GmbH
Brunnenstrasse 22
Nordrhein-Westfalen
Bielefeld, Deutschland, 33602
info@schlemming.de
https://www.schlemming.de
