Important note: Always test on the original material before use – on a hidden spot and under your actual processing conditions.
FIXON® Textile Marker Marking Ink (tube, 100 ml) is a fabric marking ink for permanent marking of textiles.
Features at a glance
- 100 ml tube, applied with a screw-on writing tip
- Dust-dry after approx. 1 minute
- Smudge-proof and water-resistant
- In eight colours: white, yellow, orange, red, green, lime, blue, black
Applications
- Marking pieces for textile finishing
- Marking workwear
- Signing textiles in production
Technical data
-
Item number: 34-001
-
Product type: fabric marking ink
-
Contents: 100 ml (tube)
-
Colours: white, yellow, orange, red, green, lime, blue and black
-
Application: with a screw-on writing tip (writing tips available separately)
-
Drying: dust-dry after approx. 1 minute
-
Properties: permanent marking, smudge-proof and water-resistant
-
Resistance (manufacturer data): organic acids, caustic soda, sulphuric acid, soap and soda washing, temperatures up to approx. 220 °C, peroxide-chlorine bleaching, heat setting, chest ironer, HT dyeing
-
Shelf life: 2 years in the closed original container at room temperature
-
Safety: highly flammable, harmful – keep away from sources of ignition, keep out of the reach of children; observe the label and the safety data sheet
-
Disposal: only dispose of completely emptied or dried-out containers with household waste
-
Safety data sheet: available on request
Frequently asked questions
Can the marking be removed again?
No, you should not assume so. FIXON® Textile Marker is designed for permanent markings. Only apply the marking where it will not be a problem later, and test on the original material first.
Will the marking withstand my finishing process?
According to the manufacturer, the marking ink resists typical stresses of textile finishing (see technical data). Concentrations, temperatures and exposure times are not stated. So check in your own test under your actual process conditions before marking whole batches.
How is the tube used?
The writing tip is screwed onto the tube and stays on it until the tube has been written completely empty. Only then is it screwed straight onto a new tube. Plastic (no. 0–3) and metal (no. 0–4) writing tips are available separately.
Matching products
| Item information |
Value |
| Content: |
100,00 ml
|
Product safety information
Manufacturer information:
Schlemming GmbH
Brunnenstrasse 22
Nordrhein-Westfalen
Bielefeld, Deutschland, 33602
info@schlemming.de
https://www.schlemming.de
