ROLLAX is a powdered cleaner to remove adhesive residue from operating surfaces of interlining fusing machines and irons. In addition, when used regularly, ROLLAX acts as a release agent, reducing further sticking of adhesive to operating surfaces and preserving Teflon-coated belts and plates.
- Contains highly viscous silicone
- Contains neither solvents nor poisonous chemicals and, wehn melting, does not release poisonous gases
- It does nocht damage machine surfaces or materials being fused.
- Not flammable under fusing conditions (Flash point: 240°C/465°F)
- Does not absorb humidity
Directions for use:
CONTINOUS FUSING MACHINES
- Allow the machine to reach operating temperature (120°C/250°F).
- Remove cover plates and cleaning and stripping devices if necessary.
- Sprinkle ROLLAX evenly onto the heated Teflon belt while it is running. Allow time for ROLLAX to melt and spread over both belts, permeating the adhesive residue.
- While they are wet, wipe off the residue and excess ROLLAX from both belts with a cloth.
- To assure thorough cleaning, insert some sheets of pattern paper into the machine. Repeat the cleaning process and this test, if necessary, until no spots appear on test sheets.
- The machine is ready for operation. Note : Use ROLLAX daily to maintain optimum operating conditions.
FLAT FUSING PRESSES
- Allow the machine to reach operating temperature (120°C/250°F). Note : The machine can be cleaned between operations also.
- Put a small amount of ROLLAX into a cloth bag and rub the heating plate gently with this bag. Allow time for ROLLAX to melt and permeate the adhesive residues.
- While the heating plate is still wet, wipe off the adhesive residue and excess ROLLAX with a cloth.
- To assure thorough cleaning, press a sheet of pattern paper in the machine. Repeat the cleaning process and this test, if necessary, until no spots appear on the test paper.
- The press is now ready for operation. Note : Use ROLLAX daily to maintain optimum operating conditions.
IRONS
- Allow the iron to reach operating temperature.
- Put a small amount of ROLLAX into a cloth bag and rub the surface of the iron with this bag, or place a small amount of ROLLAX on a piece of cloth and run the iron over the cloth. Allow time for ROLLAX to permeate the adhesive residue.
- While the surface is still wet, wipe off the adhesive residue with a cloth. Note : ROLLAX will save time and energy by eliminating the friction caused by adhesive residue, thus preventing scorching also.
- The iron is now ready for operation. Note : Use ROLLAX daily to maintain optimum operating conditions.
| Item information |
Value |
| Country of origin: |
Japan |
| Item weight: |
0,30 kg
|
| Content: |
0,25 kg
|
Product safety information
Manufacturer information:
Schlemming GmbH
Brunnenstrasse 22
Nordrhein-Westfalen
Bielefeld, Deutschland, 33602
info@schlemming.de
https://www.schlemming.de
